Pacifica V6-3.8L VIN L (2005)
adapter.
4) Retract caliper guide pins to clear mounting bosses on caliper adapter when installing caliper.
5) Install brake caliper in opposite way it was removed. Starting with upper end, carefully position caliper and brake shoes over brake rotor and align
outboard shoe's upper edge with caliper slide abutment. Rotate lower end of caliper into mounting position on adapter.
CAUTION: Extreme caution should be taken not to crossthread caliper guide pin bolts when they are installed.
6) Carefully install caliper guide pin bolts (Fig. 66). Tighten bolts to 23 Nm (200 inch lbs.) torque.
7) Install tire and wheel assembly. Tighten wheel mounting nuts to a torque of 135 Nm (100 ft. lbs.).
8) Lower vehicle.
9) Pump brake pedal several times to ensure vehicle has a firm brake pedal before moving vehicle.
10) Check and adjust brake fluid level as necessary.
11) Road test vehicle and make several stops to wear off any foreign material on brakes and to seat brake shoes.