chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Maintenance - Fluid Flushing Information|Page 4755 > < Maintenance - Fluid Flushing Information|Page 4753
Page 1
background image

Brake Fluid: Specifications

The brake fluid used in this vehicle must conform to DOT 3 specifications (DOT 4 and DOT 4+ are acceptable) and SAE J1703 standards. No other type
of brake fluid is recommended or approved for usage in the vehicle brake system. Use only Mopar(R)  Brake Fluid or equivalent from a tightly sealed
container.

CAUTION:  Never use reclaimed brake fluid or fluid from an container which has been left open. An open container of brake fluid will absorb moisture
from the air and contaminate the fluid.

CAUTION:  Never use any type of a petroleum-based fluid in the brake hydraulic system. Use of such type fluids will result in seal damage of the
vehicle brake hydraulic system causing a failure of the vehicle brake system. Petroleum based fluids would be items such as engine oil, transmission
fluid, power steering fluid, etc.

Maintenance - Fluid Flushing Information|Page 4755 > < Maintenance - Fluid Flushing Information|Page 4753