Pacifica V6-3.8L VIN L (2005)
Crankshaft Gear/Sprocket: Service and Repair
REMOVAL - CRANKSHAFT SPROCKET
1) Remove the timing chain.
2) Using Special Tools 8539, 5048-6, and 5048-1, remove the crankshaft sprocket while holding the crankshaft from turning (Fig. 183). Be careful
not to damage the crankshaft surfaces.
INSTALLATION - CRANKSHAFT SPROCKET
1) Position the sprocket on the crankshaft (timing mark out) with the timing slot aligned with the timing pin.
2) Install sprocket using Special Tool 8452 (Fig. 184). Install sprocket until it is fully seats on the crankshaft.
3) Install the timing chain and camshaft sprocket.