Pacifica V6-3.8L VIN L (2005)
1) Clean sealing surfaces and apply a 1/8 inch bead of Mopar Engine RTV GEN II at the parting line of the chain case cover and the rear seal
retainer (Fig. 136).
2) Position a new pan gasket on oil pan (Fig. 137).
3) Install oil pan and tighten fasteners to 12 Nm (105 inch lbs.) (Fig. 137).
4) Install the flex plate cover (Fig. 138).
5) Install the right engine mount bracket (Fig. 138).
6) Connect the in block heater (if equipped) (Fig. 138).