Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-630001.png)
Intake Manifold: Service and Repair
Intake Manifold Stripped Thread Repair
STANDARD PROCEDURE - MANIFOLD STRIPPED THREAD REPAIR
The composite upper intake manifold thread bosses, if stripped out, can be repaired by utilizing a repair screw available through Mopar parts. Repair
screws are available for the following manifold attached components:
-
MAP sensor
-
Power steering reservoir
-
EGR tube
-
Throttle cable bracket
The repair screws require a unique tightening torque specification from the original screw. Refer to the chart for specification.