Pacifica V6-3.8L VIN L (2005)
Exhaust Manifold: Service and Repair
Exhaust Manifold - Left
EXHAUST MANIFOLD - LEFT
REMOVAL
1) Disconnect battery negative cable.
2) Remove bolts attaching crossover pipe to exhaust manifold (Fig. 168).
3) Disconnect left cylinder bank spark plug wires.
4) Remove heat shield attaching bolts (Fig. 169).
5) Remove bolts attaching exhaust manifold to cylinder head (Fig. 169).
6) Remove the exhaust manifold (Fig. 169).
7) Inspect and clean manifold.
CLEANING
1) Discard gasket (if equipped) and clean all surfaces of manifold and cylinder head.
INSPECTION