Pacifica V6-3.8L VIN L (2005)
Air Duct: Service and Repair
Instrument Panel Air Outlets
REMOVAL
1. If servicing the right instrument panel air outlet, use a trim stick C-4755 or equivalent and gently pry the outer perimeter of the center trim panel
from the right side of the instrument panel and remove the trim panel. If servicing the left instrument panel air outlet, remove the instrument cluster
bezel.
2. Remove the instrument panel end cap from the end of the instrument panel being serviced.
Instrument Panel Outlet - Right Side Shown
3. Remove the two screws that secure the instrument panel air outlet to the instrument panel and remove the outlet.
INSTALLATION
1. Position the instrument panel air outlet into opening in the instrument panel.
2. Install the two screws that secure the instrument panel air outlet to the instrument panel. Tighten the screws to 2 N.m (17 in. lbs.).
3. Install the instrument panel end cap.
4. If servicing the left instrument panel air outlet, install the instrument cluster bezel. If servicing the right instrument panel air outlet, install the right
trim panel firmly and evenly onto the instrument panel until the retaining tabs are fully engaged.