Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-1638002.png)
Rear Floor Outlet Assembly
1. Remove the two screws that secure the rear floor outlet assembly to the rear of the center floor console and remove the floor outlet assembly.
2. Remove the center floor console cover.
3. Remove the gear shift assembly.
Floor Console Base And Duct Assembly
4. Remove the five nuts and two bolts that secure the floor console base and duct assembly to the floor panel and remove the base and duct assembly.
INSTALLATION
1. Position the floor console base and duct assembly into the vehicle.
2. Install the five nuts and two bolts that secure the floor console base and duct assembly to the center floor panel. Tighten the nuts and bolts to 5
N.m (45 in. lbs.).
3. Install the gear shift assembly.
4. Install the center floor console cover.
5. Install the rear floor outlet assembly onto the rear of the center floor console.
6. Install the two screws that secure the rear floor outlet assembly to the center floor console. Tighten the screws to 2 N.m (17 in. lbs.).