Pacifica V6-3.8L VIN L (2005)
6. Lubricate a new rubber O-ring seal with clean refrigerant oil and install it on the liquid line fitting.
7. connect the A/C liquid line to the receiver/drier.
8. Install the bolt that secures the A/C liquid line to the receiver/drier. Tighten the bolt to11 N.m (100 in. lbs.).
9. Install the A/C pressure transducer.
10. Install the air cleaner housing.
11. Reconnect the negative battery cable.
12. Evacuate the refrigerant system. Refer to: Heating and Air Conditioning, Service and Repair, Refrigerant System Evacuate, See: Service and
Repair/Procedures/Refrigerant System Evacuate
13. Charge the refrigerant system. Refer to: Heating and Air Conditioning, Service and Repair, Refrigerant System Charge, See: Service and
Repair/Procedures/Refrigerant System Charge