Pacifica V6-3.8L VIN L (2005)
Housing Assembly HVAC: Overhaul
Air Distribution Housing
NOTE: The air distribution housing must be removed from the HVAC housing and disassembled for service of the mode-air and blend-air doors.
DISASSEMBLY
1. Remove the air distribution housing from the HVAC housing and place it on a workbench.
Actuator And Heater Core
2. Remove the two screws that secure the heater core to the driver side of the air distribution housing and carefully remove the heater core.
3. Remove the screws that secure the mode door actuator and the two blend door actuators to the driver side of the air distribution housing and
remove the actuators.