Pacifica V6-3.8L VIN L (2005)
Driver/Vehicle Information Display: Description and Operation
Universal Transmitter
On CS models, a Universal Transmitter transceiver is standard factory-installed equipment. The universal transmitter transceiver is integral to the
overhead console mounted CMTC module. The only visible component of the universal transmitter are the three transmitter push buttons centered in the
overhead console. The three universal transmitter push buttons are identified with one, two or three light indicators and raised buttons so that they be
easily identified by sight or by feel.
Each of the three universal transmitter push buttons controls an independent radio transmitter channel. Each of these three channels can be trained to
transmit a different radio frequency signal for the remote operation of garage door openers, motorized gate openers, home or office lighting, security
systems or just about any other device that can be equipped with a radio receiver in the 286 to 399 Mega Hertz (MHz) frequency range for remote
operation. The universal transmitter is capable of operating systems using either rolling code or non-rolling code technology.
The universal transmitter cannot be repaired or adjusted and if the transmitter is faulty or damaged, the complete CMTC module must be replaced. If the
universal transmitter push buttons are faulty or damaged the complete overhead console housing assembly must be replaced.
The universal transmitter operates on a non-switched source of battery current so the unit will remain functional, regardless of the ignition switch
position. For more information on the features, programming procedures and operation of the universal transmitter, see the owner's manual in the vehicle
glove box.