Pacifica V6-3.8L VIN L (2005)
Fuel Gauge Sender: Service and Repair
REMOVAL
1. Release the fuel pressure.
2. Disconnect negative battery cable.
3. Remove fuel tank.
4. Vacuum area before removing module lock ring.
5. Disconnect vapor line and electrical connector.
Locking Ring Contact Points
6. Module lock ring contact points.
Module Locking Ring
7. Remove module lock ring.
NOTE: Use a brass punch to remove the 1/4 turn lock ring.
8. Remove module top.
9. Tip module on to it's side to drain fuel from reservoir in module.
10. Drain fuel tank, use an approved gasoline draining station.
11. Disconnect electrical connector for fuel level sending card.