Pacifica V6-3.8L VIN L (2005)
7. Install plug in, or tape over the opened discharge line fitting and the condenser port.
Discharge Line To A/C Compressor
8. Remove the nut that secures the A/C discharge line to the A/C compressor.
9. Disconnect the A/C discharge line from the A/C compressor and remove and discard the O-ring seal and gasket.
10. Install plug in, or tape over the opened discharge line fitting and the compressor port.
11. Remove the A/C discharge line from the engine compartment.
INSTALLATION
1. Position the A/C discharge line into the engine compartment.
2. Remove the tape or plugs from the discharge line fitting and the compressor port.
3. Lubricate a new rubber O-ring seal with clean refrigerant oil and install it and a new gasket onto the discharge line fitting.
4. Connect the A/C discharge line to the A/C compressor.
5. Install the nut that secures the A/C discharge line to the A/C compressor. Tighten the nut to 23 N.m (17 ft. lbs.).
6. Remove the tape or plugs from the discharge line fitting and the condenser port.
7. Lubricate a new rubber O-ring seal with clean refrigerant oil and install it and a new gasket onto the discharge line fitting.
8. Connect the A/C discharge line to the A/C condenser.
9. Install the nut that secures the A/C discharge line to the A/C condenser. Tighten the nut to 23 N.m (17 ft. lbs.).
10. Install the radiator air seals and the air seal retaining pins.
11. Install the radiator sight shield and the sight shield retaining pins.
12. Install the front fascia.
13. Evacuate the refrigerant system. Refer to: Heating and Air Conditioning, Service and Repair, Refrigerant System Evacuate, See: Heating
and Air Conditioning/Service and Repair/Procedures/Refrigerant System Evacuate