Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-962001.png)
Manifold Pressure/Vacuum Sensor: Service and Repair
REMOVAL
1. Disconnect negative battery cable.
MAP Sensor
2. Unlock and disconnect electrical connector.
3. Remove 2 mounting screws.
4. Remove sensor.
INSTALLATION
When servicing components, always reassemble components with new O-rings and seals where applicable. If assembly of component is difficult, a light
coat of engine oil may be applied to the O-RINGS ONLY to aid assembly.
MAP Sensor