Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-1022001.png)
Accelerator Pedal: Service and Repair
REMOVAL
Pedal Assembly
1. The accelerator pedal is connected to the throttle body linkage by the throttle cable. The cable is protected by a plastic sheathing and is connected
to the throttle body linkage. It is connected to the upper part of the accelerator pedal arm by a plastic retainer (clip). This retainer (clip) snaps into
the top of the accelerator pedal arm. It is mounted to the dash panel with 2 studs and nuts.
Cables And Bracket
2. There are 2 cables at the throttle body, one for speed control and throttle control. Remove the throttle cable from throttle body.
CAUTION: Be careful not to damage or kink the cable core wire (within the cable sheathing) while servicing the accelerator pedal or throttle
cable.