Pacifica V6-3.8L VIN L (2005)
Ignition Coil: Service and Repair
Ignition Coil
REMOVAL
1. Disconnect negative battery cable.
Ignition Coil
2. Unlock and disconnect the electrical connector from ignition coil.
3. Grasping the spark plug cable, twist the assembly 1/2 turn and pull the cable from the ignition coil.
4. Remove the nuts from the mounting studs.
5. Pull coil assembly straight up and off of mounting studs.
INSTALLATION
Ignition Coil
1. Install ignition coil over mounting studs.
2. Connect and lock the electrical connector to ignition coil.
3. Install mounting nuts and tighten to N.m 11.5 ( 105 in. lbs.).
4. Install ignition cables to coil assembly. (5) Connect negative battery cable.