chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

System Description|Page 2209 > < System Description|Page 2207
Page 3
background image

BRING INTO CONTACT WITH ELECTRICITY. DO NOT STORE AT TEMPERATURE EXCEEDING 93° C(200° F). REPLACE AIRBAG
SYSTEM COMPONENTS ONLY WITH PARTS SPECIFIED IN THE MOPAR PARTS CATALOG. SUBSTITUTE PARTS MAY APPEAR
INTERCHANGEABLE, BUT INTERNAL DIFFERENCES MAY RESULT IN INFERIOR OCCUPANT PROTECTION. THE FASTENERS,
SCREWS, AND BOLTS ORIGINALLY USED FOR THE AIRBAG SYSTEM COMPONENTS HAVE SPECIAL COATINGS AND Are
SPECIFICALLY DESIGNED FOR THE AIRBAG SYSTEM. THEY MUST NEVER BE REPLACED WITH ANY SUBSTITUTES. ANY TIME A
NEW FASTENER IS NEEDED, REPLACE IT WITH THE CORRECT FASTENERS PROVIDED IN THE SERVICE PACKAGE OR SPECIFIED IN
THE MOPAR PARTS CATALOG. FAILURE TO TAKE THE PROPER PRECAUTIONS CAN RESULT IN ACCIDENTAL AIRBAG
DEPLOYMENT AND PERSONAL INJURY OR DEATH.

CAUTION:  Deployed Front Air Bags may or may not have live pyrotechnic material within the airbag inflator. Do not dispose of Driver and
Passenger Airbags unless you are sure of complete deployment. Please refer to the Hazardous Substance Control System for Proper Disposal. Dispose
of deployed air bags in a manner consistent with state, provincial, local, and federal regulations. Use the following table to identify the status of the
Airbag Squib.

AIRBAG SQUIB STATUS

1. Using a DRBIII(R) read Airbag DTC's If the following active codes are present:

If neither of the following codes is an active code:

DRIVER KNEE BLOCKER AIRBAG

The most visible part of the Driver Knee Blocker Airbag is the knee blocker trim cover. The knee blocker trim cover and airbag are mounted directly to
the instrument panel structure below the steering column. When supplied with the proper electrical signal, the inflator discharges the gas directly into the
airbag. The airbag cannot be repaired, and must be replaced if deployed or in any way damaged.

WARNING:

-

DO NOT ATTEMPT TO MODIFY ANY PART OF YOUR ADVANCED AIRBAG SYSTEM. THE AIRBAG MAY INFLATE
ACCIDENTALLY OR MAY NOT FUNCTION PROPERLY IF MODIFICATIONS ARE MADE. TAKE YOUR VEHICLE TO AN
AUTHORIZED DEALER FOR ANY ADVANCED AIRBAG SYSTEM SERVICE. IF YOUR SEAT INCLUDING YOUR TRIM
COVER AND CUSHION NEEDS TO BE SERVICED IN ANY WAY (INCLUDING REMOVAL OR LOOSENING/TIGHTENING OF
SEAT ATTACHMENT BOLTS), TAKE THE VEHICLE TO YOUR AUTHORIZED DEALER. ONLY MANUFACTURER
APPROVED SEAT ACCESSORIES MAY BE USED. CONTACT YOUR AUTHORIZED DEALER IF IT IS NECESSARY TO
MODIFY AN ADVANCED AIRBAG SYSTEM FOR PERSONS WITH DISABILITIES.

-

NEVER STRIKE OR KICK THE AIRBAG CONTROL MODULE, AS IT CAN DAMAGE THE IMPACT SENSOR OR AFFECT ITS
CALIBRATION. IF AN AIRBAG CONTROL MODULE IS ACCIDENTALLY DROPPED DURING SERVICE, THE MODULE MUST
BE SCRAPPED AND REPLACED WITH A NEW UNIT. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN
ACCIDENTAL AIRBAG DEPLOYMENT AND PERSONAL INJURY OR DEATH.

System Description|Page 2209 > < System Description|Page 2207