Pacifica V6-3.8L VIN L (2005)
Electronic Brake Control Module: Service and Repair
Antilock Brake Module (MK25E)
REMOVAL
1. Disconnect negative (-) battery cable from battery post and isolate.
2. Raise and support vehicle.
ABM Mounting Screws - Without Traction Control
3. If not equipped with traction control, remove three screws attaching the antilock brake module (ABM) to the HCU.
ABM Mounting Screws - With Traction Control
4. If equipped with traction control, remove four screws attaching antilock brake module (ABM) to HCU.