Pacifica V6-3.8L VIN L (2005)
ORC Connectors
4. From the right side of the vehicle, disconnect the two ORC electrical connectors.
5. Remove the three retaining screws to the ORC. One on the left side of the floor tunnel, and one in front of (toward bulkhead) and behind (toward
vehicle rear) the ORC unit.
6. Remove ORC from vehicle.
INSTALLATION
1. Position ORC in vehicle.
ORC - Remove/Install
2. Install the three retaining screws to the ORC. One on the left side of the floor tunnel, and one in front of (toward bulkhead) and behind (toward
vehicle rear) the ORC unit. Torque screws to 14.5 N.m (128 in. lbs.).
3. From the right side of the vehicle, connect the two ORC electrical connectors.