Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-195001.png)
Seat Heater Switch: Service and Repair
Front Heated Seat Switch
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the front door trim panel.
3. Disconnect the harness from the door module.
4. Remove the heated seat switch assembly by pressing in the four clips.
INSTALLATION
1. Install the heated seat switch assembly.
2. Connect the harness to the door module.
3. Install the front door trim panel.
4. Reconnect the battery negative cable.