Pacifica V6-3.8L VIN L (2005)
6. Remove the right multi-function switch from the multi-function switch mounting housing.
INSTALLATION
1. Position the right multi-function switch onto the multi-function switch mounting housing.
2. Install the two screws that secure the right multi-function switch to the multi-function switch mounting housing. Torque the screws to 2.5 Nm (22
in. lbs.).
3. Connect the instrument panel wire harness connector to the right multi-function switch.
4. Install the upper and lower steering column shrouds. Torque the screws to 2 Nm (17 in. lbs).
5. Connect the battery negative cable.
6. Verify vehicle and system operation.