Pacifica V6-3.8L VIN L (2005)
Battery Tray: Service and Repair
Battery Holddown
REMOVAL
1. Turn the ignition switch to the Off position. Be certain that all electrical accessories are turned off.
2. Remove the negative battery cable from the negative battery post.
3. Remove the nut that secures the battery hold down bracket to the battery tray.
4. Remove the battery hold down bracket from the battery tray.
INSTALLATION
1. Install the battery hold down bracket in the battery tray. Be certain the battery and battery hold down are properly positioned.
2. Install the nut that secures the battery hold down bracket to the battery tray. Torque to 20 N.m (180 in. lbs.).
3. Connect the negative battery cable. Torque to 40 in. lbs.