Pacifica V6-3.8L VIN L (2005)
8.
Using locking pliers rotate the tube of the Rotary Tilt Mechanism (RTA) clockwise looking from the steering wheel providing maximum slack in
the cable, be careful not to damage the tube (Fig. 4).
NOTE:
Continue holding the RTA in this position through Step 10.
9.
With the other hand place the ball of the cable into the eyelet of the tilt release lever linkage. Push the ball down into the opening until it locks into
place (Fig. 5).
10. Rotate the tube counter-clock wise, then release the pliers holding the tube of the RTA.
11.
Wipe any excessive grease from the top of the linkage between the hole and the ball.