Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-1550003.png)
Fig. 59
16. Remove lower mounting bolt and nut at each rear shock absorber (Fig. 59).
Fig. 60
17. Remove both front and rear crossmember mounting bolts on left side of vehicle (Fig. 60).
CAUTION: To avoid damaging other components of vehicle, do not lower crossmember any further than necessary to remove coil
spring.
18. Slowly lower jack allowing left side of crossmember to drop. Do not lower jack at a fast rate. Lower jack just enough to allow spring removal. Do
not lower jack any further than necessary.