Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-1555001.png)
Front Steering Knuckle: Service and Repair
Front Suspension
KNUCKLE
REMOVAL
1. Raise and support vehicle.
2. Remove wheel and tire assembly.
3. Remove cotter pin, nut lock and spring washer from end of halfshaft stub shaft and hub nut (Fig. 1).
4. With aid of a helper applying brakes to keep front hub from turning, remove hub nut (Fig. 1).
5. Access and remove front brake rotor.
6. Disconnect vehicle wiring harness from wheel speed sensor connector (Fig. 2).
7. Unclip wheel speed sensor connector and routing clip from frame rail outer reinforcement (Fig. 2).