Pacifica V6-3.8L VIN L (2005)
Suspension Spring ( Coil / Leaf ): Service and Repair
SPRING
REMOVAL
1. Raise and support vehicle.
2. Remove wheel and tire assembly.
3. Position an extra pair of jack stands under and support forward end of engine cradle to help stabilize vehicle during rear suspension
removal/installation.
4. Position under-hoist utility jack or transmission jack under center of rear suspension crossmember (without AWD) or rear driveline module (with
AWD) (Fig. 34). Raise jack head to contact driveline module/suspension crossmember and secure in place.
5. Remove two shock absorber upper mounting bolts (Fig. 32).