Pacifica V6-3.8L VIN L (2005)
2. Install transaxle oil filter (Fig. 459). Inspect the O-ring and replace if necessary.
3. Ensure the transaxle oil pan and transaxle case sealing surfaces are clean and dry. Install an 1/8" bead of Mopar(R) Silicone Rubber Adhesive
Sealant to the oil pan and install (Fig. 460). Torque oil pan-to-transaxle case bolts (Fig. 461) to 19 Nm (165 inch lbs.).
4. Raise engine cradle crossmember into position.