Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-2633001.png)
Wiper Arm: Service and Repair
Rear Wiper Arm Replacement
REMOVAL
Rear Wiper Arm -Remove/Install
1. Lift up the wiper arm nut cover by pivoting out of the way.
2. Remove the rear wiper arm retaining nut.
3. Lift rear wiper arm off the rear window and gently rock the arm back and forth until it comes off. Or, use an appropriate battery terminal puller to
pull arm off rear motor shaft.
INSTALLATION
1. Place the rear wiper arm on the rear wiper motor shaft, align the wiper blade with lower EBL line.
2. Install the rear wiper am retaining nut. Torque nut to 9 ± 1.5 Nm (80 ± 15 in. lbs.).
3. Flip down the rear wiper arm nut cover.
4. Verify wiper arm position. Adjust as necessary.