PT Cruiser L4-2.4L (2008)
Front Door Weatherstrip: Service and Repair
Front And Rear Door Upper Secondary Weatherstrip
Removal
REMOVAL
1. Open the front/rear door.
2. Using a wide blade flat tool, unseat the push pin at the base of the "A" pillar.
3. Pull the weatherstrip off the vehicle.
Installation
INSTALLATION
1. Clean off any remain butyl residue on the body.
2. Push seal into position under the quarter window glass and along the door opening.
3. Locate the push pins at the base of the "A" pillar and push into place.
4. Install the remainder of the seal.