PT Cruiser L4-2.4L (2008)
Carpet: Service and Repair
Carpet - Installation
INSTALLATION
1. Install carpet (1) through liftgate opening.
2. Unfold carpet.
3. Tuck carpet behind quarter trim panel..
4. Install lower fasteners holding B-pillar trim panel.
5. Install center floor console.
6. Install cowl trim covers.
7. Install rear seat pivot bezels and striker bezel.
8. Install door sill trim covers.
9. Install bolts attaching front seat belt lower anchors to floor. Tighten all seat belts to 40 Nm (30 ft. lbs.).
10. Install front seats.
11. Install rear floor pan cargo and flat tire tie down loop attaching screw. Tighten screw to 12 Nm (105 in. lbs.).
12. Install rear seats.
