PT Cruiser L4-2.4L (2008)
NOTE: For reinstallation purposes, when removing the tumblers from the glove box lock, be sure to make note of the location of each tumbler
within the lock cylinder.
5. If required, remove the tumblers (1) and the springs (2) from the glove box lock cylinder (3). Note the location of each tumbler within the lock.
Installation
INSTALLATION
NOTE: Be sure to install each tumble into their correct location within the lock cylinder.
1. If removed, install the springs (2) and the tumblers (1) into the glove box lock cylinder (3) in the order in which they were removed.
2. Install the ignition key (1) and the glove box lock cylinder (2) into the glove box latch (3) as an assembly.
