PT Cruiser L4-2.4L (2008)
Convertible Top Switch: Service and Repair
Power Top Control Switch - Installation
INSTALLATION
1. Position the accessory switch bezel (2) onto the back of the instrument panel center bezel (3).
2. Install the two screws (1) that secure the accessory switch bezel to center bezel. Tighten the screws to 2 Nm (17 in. lbs.).
3. Install the center bezel onto the instrument panel See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel
Center Bezel - Installation.
4. Reconnect the negative battery cable.
