PT Cruiser L4-2.4L (2008)
8. Connect the right front (1), left rear (2) and right rear (3) chassis brake tubes to their respective outlet ports on the ICU HCU (4). Using a crow
foot wrench on a torque wrench, tighten the four tube nuts to 17 Nm (145 in. lbs.).
9. LHD Vehicle:
a. Connect the left front chassis brake tube (3) at the HCU (2). Using a crow foot wrench on a torque wrench, tighten the tube nut to 17 Nm (145
in. lbs.).
b. Connect the primary (5) and secondary (4) brake tubes coming from the master cylinder (1) at the HCU (2). Using a crow foot wrench on a
torque wrench, tighten the tube nuts to 17 Nm (145 in. lbs.).
10. RHD Vehicle:
a. Connect the left front chassis brake tube (5) at the HCU (4). Using a crow foot wrench on a torque wrench, tighten the tube nut to 17 Nm (145
in. lbs.).
b. Connect the primary (3) and secondary (2) brake tubes coming from the master cylinder (1) at the HCU (2). Using a crow foot wrench on a
torque wrench, tighten the tube nuts to 17 Nm (145 in. lbs.).