PT Cruiser L4-2.4L (2008)
6. If equipped with traction control, install the four screws (1) attaching the ABM (2) to the HCU. Tighten the mounting screws to 2 Nm (17 in. lbs.).
7. If the mounting bracket (3) needs to be installed on the ICU (1), install the mounting pins in the ICU as necessary and tighten to 11 Nm (97 in.
lbs.) torque. Insert the mounting pins into the grommets mounted in the bracket, then install the single mounting bolt (2). Tighten the mounting
bolt to 11 Nm (97 in. lbs.).
8. Install the ICU in the vehicle. See: Removal and Replacement/Integrated Control Unit (ICU) - Installation
