PT Cruiser L4-2.4L (2008)
5. Remove the wheel speed sensor cable (3) from the retainer on the brake hose bracket (2) mounted to the frame rail (6).
6. Remove the screw (3) fastening the wheel speed sensor (1) head to the knuckle (4).
CAUTION: When removing a wheel speed sensor from the knuckle, do not use pliers on the sensor head. This may damage the sensor
head. If the sensor has seized, use a hammer and a punch to tap the edge of the sensor head ear, rocking the sensor side-to-side until free.
7. Carefully pull the sensor head with heat shield (2) out of the knuckle. Separate the shield from the sensor head.
8. Remove the screw (5) securing the wheel speed sensor routing bracket to the rear of the strut (6). Remove the wheel speed sensor (1) from the
vehicle.
