PT Cruiser L4-2.4L (2008)
CAUTION: Do not use a screw driver or other metal tool for seal removal. Using such tools can scratch the bore or leave burrs on the seal
groove edges.
6. Using a soft tool such as a plastic trim stick (1), work the piston seal (2) out of its groove in caliper piston bore. Discard the used seal.
7. Clean the piston bore and drilled passage ways with alcohol or a suitable solvent. Wipe it dry using only a lint-free cloth.
8. Inspect both the piston and bore for scoring or pitting. Bores that show light scratches or corrosion can usually be cleared of the light scratches or
corrosion using crocus cloth.
RearGuide Pin Bushings
GUIDE PIN BUSHINGS
Before disassembling the brake caliper, clean and inspect it. See: Procedures/Disc Brake Caliper - Inspection
NOTE: Use the following steps to remove each guide pin bushing and sleeve.
1. Push the guide pin bushing sleeve (3) towards the back of the caliper (1), then pull the sleeve out the back of the caliper bushing (2).
