PT Cruiser L4-2.4L (2008)
CAUTION: Extreme caution should be taken not to cross-thread the caliper guide pin bolts (4) when they are installed.
6. Carefully install the caliper guide pin bolts (4). Tighten the bolts to 22 Nm (192 in. lbs.).
7. Install tire and wheel assembly (1) See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels -
Installation. Install and tighten the wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
8. Lower the vehicle.
9. Pump the brake pedal several times to ensure the vehicle has a firm brake pedal before moving the vehicle.
10. Road test the vehicle and make several stops to wear off any foreign material on the brakes and to seat the brake pads.
