PT Cruiser L4-2.4L (2008)
5. Install the tire and wheel assembly (1) See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels -
Installation. Install and tighten the wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
6. Lower the vehicle.
7. Remove the brake pedal holding tool.
8. Bleed the caliper as necessary. See: Brake Bleeding
9. Road test the vehicle and make several stops to wear off any foreign material on the brakes and to seat the brake shoes.
Rear
INSTALLATION
CAUTION: When installing new brake components, be sure to use correct parts. Parts designed for BR4 Performance Brake System must not
