PT Cruiser L4-2.4L (2008)
5. Turbo Engine - Remove the two bolts (1) fastening the power distribution center and mounting bracket (2) in place.
6. Lift the power distribution center and mounting bracket up and move it to the driver side, out of the way.
7. Clean the area around where brake tubes attach to the ICU hydraulic control unit (HCU) using a suitable brake cleaner such as Mopar(R) Brake
Parts Cleaner or equivalent.
8. LHD Vehicle:
a. Disconnect the primary (5) and secondary (4) brake tubes coming from the master cylinder (1) at the HCU (2).
b. Disconnect the left front chassis brake tube (3) at the HCU (2).
9. RHD Vehicle:
a. Disconnect the primary (3) and secondary (2) brake tubes coming from the master cylinder (1) at the HCU (4).
b. Disconnect the left front chassis brake tube (5) at the HCU (2).