PT Cruiser L4-2.4L (2008)
Wheel Cylinder: Removal and Replacement
Removal
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Brakes - Caution.
1. Using a brake pedal holder, depress the brake pedal past its first one inch of travel and hold it in this position. This will isolate the master cylinder
from the brake hydraulic system and will not allow the brake fluid to drain out of the master cylinder reservoir.
2. Raise and support the vehicle. See: Maintenance/Vehicle Lifting/Service and Repair
3. Remove the wheel mounting nuts (3), then the tire and wheel assembly.
4. Disconnect the brake tube (3) at the wheel cylinder (1).