PT Cruiser L4-2.4L (2008)
4. Remove the caliper assembly (1) from the brake adapter by first rotating the top of the caliper away from the rotor (2), and then lifting the caliper
assembly off the lower machined abutment (4) on the adapter.
5. Hang the brake caliper from rear strut using wire or cord to prevent the weight of the caliper from damaging the brake hose.
6. Remove any clips (9) retaining the brake rotor (8) to the wheel studs.
7. Slide the brake rotor (8) off the hub and bearing (2).
8. Remove the dust cap (10) from the rear hub and bearing (2).
9. Remove the rear hub and bearing retaining nut (11).
10. Remove the rear hub and bearing (2) from the rear spindle (6).
11. Remove the rear brake shoe (1) hold-down clip (2) from the hold-down pin (3).