PT Cruiser L4-2.4L (2008)
Engine Mount: Service and Repair
Structural Collar
Removal
REMOVAL
STRUCTURAL COLLAR - AUTOMATIC TRANSAXLE EQUIPPED
1. Raise vehicle on hoist.
2. Remove bolts attaching bending strut (4) to engine and transaxle (1).
3. Remove bolts attaching structural collar (2) to engine, oil pan, and transaxle. Remove strut and collar.
STRUCTURAL COLLAR - MANUAL TRANSAXLE EQUIPPED
1. Raise vehicle on hoist.
2. Remove bolts attaching collar and clutch slave cylinder (1) to transaxle (2).
3. Remove remaining bolts attaching structural collar (4) to oil pan and transaxle. Remove structural collar (4).
Installation
INSTALLATION
STRUCTURAL COLLAR - AUTOMATIC TRANSAXLE EQUIPPED
CAUTION: Torque procedure for the structural collar and bending strut must be followed or damage could occur to oil pan, collar, and/or
bending strut.