chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Defroster Ducts - Removal|Page 7433 > < Cable-Mode Door|Page 7428
Page 1
background image

Air Duct: Service and Repair
Defroster Ducts - Removal

REMOVAL

WARNING: On vehicles equipped with airbags, disable the airbag system before attempting any steering wheel, steering column, or instrument
panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system
capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the
proper precautions could result in accidental airbag deployment and possible personal injury or death.

1. Remove the instrument panel assembly from the vehicle and place it on a workbench See: Body and Frame/Interior Moulding / Trim/Dashboard /

Instrument Panel/Service and Repair/Instrument Panel - Removal.

2. Disconnect the right demister duct (1) and the left demister duct (3) from the defroster duct (4).
3. Remove the four screws (2) that secure the defroster duct to the instrument panel and remove the duct.

Defroster Ducts - Removal|Page 7433 > < Cable-Mode Door|Page 7428