PT Cruiser L4-2.4L (2008)
Fuel Gauge Sender: Service and Repair
Fuel Pump Module - Installation
INSTALLATION - GAS
1. Wipe seal area of tank clean. Place a new seal between the tank threads and the pump module opening.
NOTE: The pump has to properly located to the tank for the fuel gauge to work properly.
2. Position fuel pump module in tank. Make sure the alignment tab line up on the fuel tank and pump module for Gas or Diesel fuel tanks.
3. While holding the pump module in position, install lock ring and use special tool #9340 to tighten lock ring.
4. Install fuel tank, See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Fuel Tank - Installation.
