PT Cruiser L4-2.4L (2008)
Tire Pressure Sensor: Service and Repair
Removal
REMOVAL
1. Raise and support vehicle. See: Maintenance/Vehicle Lifting/Service and Repair
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1). See: Maintenance/Wheels and Tires/Service and Repair/Removal and
Replacement/Tires and Wheels - Removal
CAUTION: The cap used on this valve stem contains an O-ring seal to prevent contamination and moisture from entering the valve stem.
Retain this valve stem cap for reuse. Do not substitute a regular valve stem cap in its place.
CAUTION: The valve stem used on this vehicle is made of aluminum and the core is nickel plated brass. The original valve stem core must be
reinstalled and not substituted with a valve stem core made of a different material. This is required to prevent corrosion in the valve stem
caused by the different metals.