PT Cruiser L4-2.4L (2008)
8. Remove the one fastener (2) securing the wheel house splash shield (1) to the drive belt splash shield (3).
NOTE: Depending on application, it may be necessary to remove some fasteners securing the front fascia (1) to the body lower reinforcement in
order to access drive belt splash shield forward fastener.
9. Remove the fastener (5) securing the drive belt splash shield (3) to the front suspension crossmember (6).
10. Remove the fasteners (4) securing the splash shield (3) to the body (2).
11. Remove the drive belt splash shield (3).
12. Remove the accessory drive-belt from the A/C compressor and power steering pump. See: Drive Belt/Service and Repair/Removal and
Replacement/Accessory Drive Belt - Removal