PT Cruiser L4-2.4L (2008)
Wheel Bearing: Service and Repair
Rear Hub / Bearing - Installation
Rear Disc Brake Vehicles
REAR DISC BRAKE VEHICLES
1. Slide the hub and bearing (2) onto the spindle (6).
2. Install a NEW hub nut (11) on the spindle. Tighten the nut to 217 Nm (160 ft. lbs.).
3. Install the hub and bearing dust cap (10).
4. Install the brake rotor (8) and caliper (1). Install and tighten the caliper guide pin bolts (4) to 22 Nm (192 in. lbs.). See: Brakes and Traction
Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor - Installation
5. Install the bolt securing the disc brake flex hose to the axle.
6. Install tire and wheel assembly (1) See: Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Install and tighten wheel
mounting nuts (3) to 135 Nm (100 ft. lbs.).
7. Lower the vehicle.
8. Pump the brake pedal several times to ensure the vehicle has a firm brake pedal before moving the vehicle.
Rear Drum Brake Vehicles
REAR DRUM BRAKE VEHICLES
