PT Cruiser L4-2.4L (2008)
Evaporative Emission Control Canister: Service and Repair
Vapor Canister - Installation
INSTALLATION
1. Install EVAP canister over bracket tabs.
2. Push canister back and into the bracket until the spring clips snap over the edge of the canister.
3. Install the push pin through the EVAP canister and the bracket and into the fuel tank.
4. Install hoses and lines.
5. Install the fuel tank and EVAP system,See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Fuel Tank - Installation.