PT Cruiser L4-2.4L (2008)
Convertible Top Relay: Service and Repair
Removal
REMOVAL
1. Start with the folding top in the raised and latched position.
2. Disconnect and isolate the battery negative cable.
3. Remove the rear seat back, See: Body and Frame/Seats/Seat Back/Service and Repair/Seat Back - Removal.
4. Remove the well liner/carpet from the power top well.
5. Remove the foam pump cover from over the motor/hydraulic pump.
6. Disconnect the motor/hydraulic pump relay wire harness connector (3).
7. Depress the relay retaining tab and remove the relay (2) from the bracket.