PT Cruiser L4-2.4L (2008)
1. Position the Occupant Classification Module (OCM) (2) under the passenger front seat cushion.
2. Connect the two electrical connectors (3) to the OCM (2).
3. Carefully position the OCM to the OCM bracket (1). When the OCM is correctly positioned, the connector on the module will be pointed rearward
in the vehicle and the locating pins on the module will be engaged in the bracket.
4. Install the two screws (4) that secure the OCM to the bracket.
WARNING: Do not connect the battery negative cable. Serious or fatal injury may result if the system test is not performed first.
WARNING: Following successful completion of the Airbag System verification test procedure, perform the Occupant Classification System
Verification Test using a diagnostic scan tool and the Occupant Classification Seat Weight special tool 9077. Refer to the appropriate diagnostic
information.
